Winsock error 0x0000271e when speed limit is enabled

Welcome to BestSync Support Forum!
If you have any questions, comments, concerns, suggestion, please summit here, we'll try to reply you in short time.
Thank you!
Post Reply
jmendiburu
Posts: 4
Joined: Sun Dec 25, 2011 11:16 am

Winsock error 0x0000271e when speed limit is enabled

Post by jmendiburu »

Dear Sirs,

I'm having problems with Bestsync when syncing a FTP site to a local USB drive, but only when speed limits are enabled.

Error message is:

winsock:Receive::Error.:error:(0x0000271e):El sistema detectó una dirección de puntero no válida al intentar utilizar un argumento de puntero en una llamada.

Please find attached log files for both cases, when speed limits are enabled and when not.

Thank you
Attachments
Logs.zip
(5.89 KiB) Downloaded 253 times
RiseFly
Site Admin
Posts: 1077
Joined: Tue Nov 03, 2009 2:51 pm

Re: Winsock error 0x0000271e when speed limit is enabled

Post by RiseFly »

We have made slightly modification related to the speed limitation control.
Please download the new BestSync 2018 Ver 13.0.1.4 to see if the problem can be resolved.
And please confirm the speed limitation settings to see if you have set to to low speed such as 0 K/s etc.
jmendiburu
Posts: 4
Joined: Sun Dec 25, 2011 11:16 am

Re: Winsock error 0x0000271e when speed limit is enabled

Post by jmendiburu »

I'm currently using BestSync 2018 Ver 13.0.1.4, so this doesn't help.
Speed limit is set at 12500 KBytes.
Thanks
RiseFly
Site Admin
Posts: 1077
Joined: Tue Nov 03, 2009 2:51 pm

Re: Winsock error 0x0000271e when speed limit is enabled

Post by RiseFly »

Please download and install Bestsync again, because we have changed a little related to the speed limitation thought the version number has not been changed.
Post Reply